// //
Geotest equipments Home Product News About us Contact us French
tag:磁力搜
 PRODUCTS  SHOW 
 
CTA-3 Triple Consolidation Apparatus

Loading pressure:
12.5 – 4000 Kpa/30 cm2, 12.5 – 2000 Kpa/50 cm2(high-pressure)
12.5 – 1600 Kpa/30 cm2, 12.5 – 800 Kpa/50 cm2(mid-pressure)
12.5 – 800 Kpa/30 cm2, 12.5 – 400 Kpa/50 cm2(low-pressure)
Lever ratio: 20:1, 24:1 (high-pressure)
                   12:1, 10:1 (mid and low-pressure)
Sample area: 30 cm2, 50 cm2

 
CTA-2 Duplex Consolidation Test Apparatus
Same as CTA-3, but every unit complete with 2 sets of consolidation cells.
 
CTA-P Protable Consolidation Test Apparatus

 

Sample area: 30 cm2, 50 cm2
Lever ratio: 20:1
Overall dimensions: 500*170*380 mm
Weight approx: 20 kg

 
CTA-KO KO Consolidation Test Apparatus

 

Sample diameter: 61.8mm         
Sample height: 40mm
Axial load: 6KN                 
Load pressure: 0~1000Kpa
Axial displacement: 0~10mm
Working temperature: 20˚C±5˚C     
Relative humidity: < 85%
Relative error of load ring: <±1‰    
Relative error of height: <±2‰
Relative error of axial displacement: 0.03mm min. division 0.01mm

 
CTA-1A Automatic Pneumatic Consolidation Test Apparatus

 

Load capacity: 0 ~ 4.8 KN
Loading precision:
1. Absolute error is smaller than ±1.0 Kpa when the load is smaller
than 100 Kpa.
2. Relative error is smaller than ±1.0 Kpa when the load is between
100 Kpa and 1600 Kpa.
Sample area: 30 cm2or 50 cm2
Air pressure control range: 0 ~ 0.9 Mpa
Pressure sensor: 0 ~ 1.0 Mpa
Channels of transducer: 1 ~ 16 channels
Power supply: 220V 50Hz
Overall dimensions: 390×188×230mm
Weight approx: 50 kg

 
CTA-15 Temperature-controlled Pneumatic Consolidation Test Apparatus

 

Sample size: Φ61.8*20 mm, area as 30 cm2
Loading pressure: 1500 Kpa (pneumatic controlled)
Axial displacement: 10 mm (dial gauge measured)
Input and output water measurement: 0 – 50 ml
Temperature: room-temperature to 100℃

 
PPA-1 Pore Pressure Apparatus

 

Digital display: 1999 Kps
Linear degree: ±0.5%FS
Power supply: 220 V, 50 Hz, 1 ph

 
DSA-1 Manual Strain Direct Shear Apparatus

 

Sample area: 30 cm2
Sample thickness: 2 cm
Max. vertical loading: 400 Kpa
Loading grade: 50, 100, 200, 300, 400 Kpa
Lever ratio: 1:12
Max. horizontal loading: 1.2 KN
Relative weight of weights: 1.275, 2.55,5.1, 7.65, 10.2 Kpa, loading hanger as per grade 1

 
DSA-2 Electric Strain Direct Shear Apparatus (Double-speed)

 

Sample area: 30 cm2                  
Sample thickness: 2 cm
Max. vertical loading: 400 Kpa            
Loading grade: 50, 100, 200, 300, 400 Kpa
Lever ratio: 1:12                     
Max. horizontal loading: 1.2 KN
Relative weight of weights: 1.275, 2.55, 5.1, 7.65, 10.2 Kpa, hanging
pan as per grade 1.
Rotation speed of handwheel: 4 r.p.m., 12 r.p.m.
Relative shear speed: 0.8 mm/min, 2.4 mm/min
Axial displacement is 0.2mm as per rotation of the handwheel
Working voltage: 220 V , 50 Hz

 
DSA-3 Electric Strain Direct Shear Apparatus (Three-speed)

 

Sample area: 30 cm2             
Sample thickness: 2 cm
Max. vertical loading: 400 Kpa       
Loading grade: 50, 100, 200, 300, 400 Kpa
Lever ratio: 1:12                
Max. horizontal loading: 1.2 KN
Relative weight of weights: 1.275, 2.55, 5.1, 7.65, 10.2 Kpa, hanging
pan as per grade 1.
Rotation speed of handwheel: 0.1r.p.m., 4 r.p.m., 12 r.p.m.
Axial displacement is 0.2 mm as per rotation of the handwheel
Relative shear speed: 0.02 mm/min, 0.8 mm/min, 2.4 mm/min
Working voltage: 220 V , 50 Hz

 
DSA-4E Electric Strain Direct Shear Apparatus (4-Cells)

 

Sample area: 30 cm2            
Sample height: 2 cm
Max. vertical loading: 400 Kpa     
Loading grade: 50, 100, 200, 300, 400Kpa
Lever ratio: 1:12               
Max. horizontal loading: 1.2 KN
Shear box: 4 units
Pushing speed of the driven shaft: 2.4, 0.8, 0.02 mm/min
Working voltage: 220V, 50Hz

 
DSA-P Protable Direct Shear Apparatus

 

Sample area: 30 cm2        
Sample height: 2 cm
Lever ratio: 1:20           
Max. output: 1.2KN
Axial displacement is 0.2 mm as per rotation of the handwheel
Weight of weights: total 6 kg

 
DSA-12 Direct Shear and Pre-press Apparatus (12 Cells)

 

Sample area: 30 cm2           
Max. loading:1.2 KN
Lever ratio:: 1:12          
Max. loading: 400Kpa
Loading grade: 50, 100, 200, 300, 400 Kpa
Consolidation cells: 12 sets (can load 2 specimens)

 
DSA-8 Creep Direct Shear Apparatus

 

Sample size: Φ61.8×20 mm, area as 30 cm2
Max. shearing force: 1.8 KN
Max. vertical force: 0.8 Mpa
Lever ratio: 12:1
Vertical deformation range: 0 – 10 mm, accuracy: ±1%
Horizontal deformation range: 0 – 10 mm, accuracy: ±1%
Power supply: 220 V, 50 Hz

 
DSA-1R Ring Shear Apparatus

 

Sample size: 100 mm out. dia., 60 mm inner dia., 20 mm high
Sample area: 50.27 cm2
Average diameter of sample: 8.17 cm
Vertical force: 900 Kpa
Torque: 30 N.m

 
DSA-F Field Direct Shear Apparatus

 

Sample size: 300×300×400 mm
Horizontal shear force: 0 – 10 KN
Shear displacement: 0 – 200 mm
Shear rate: 0.001 – 8 mm/min

 
VA-2 Vane Apparatus

 

Measuring depth: 3 meter
Vane size: 16×32 mm, 20×40 mm, 25.4×50.8 mm, 50.8×101.6 mm

 
TTA-10 Light Bench Triaxial Testing Apparatus

 

Sample size: Φ39.1*80 mm
Load capacity: 10 KN
Infinitesimal testing speed from 0.016 to 1.60 mm/min (8-speed
mechanical transmission)
Working table stroke: 0 – 50 mm
Cell pressure: 0 – 1 Mpa
Drainage: 0 – 0.6 Mpa
Pore pressure: 0 – 1 Mpa
Volume change: 0 – 25 cm / 0.1 cm (resolution)
Axial displacement: 0 – 30 mm

 
TTA10-1 Bench-type Triaxial Testing Apparatus

 

Sample size: Φ39.1*80 mm
Load capacity: 10 KN
Infinitesimal testing speed from 0.0016 to 4 mm/min (15-speed
mechanical transmission)
Working table stroke: 0 – 100 mm
Cell pressure: 0 – 1 Mpa
Drainage: 0 – 600 Kpa
Pore pressure: 0 – 1000 Kpa
Volume change: 0 – 50 cm3
Axial displacement: 0 – 20 mm (dial gauge)

 
TTA10-2 Bench-type Triaxial Testing Apparatus

 

Sample size: Φ39.1*80 mm
Load capacity: 10 KN
Infinitesimal testing speed from 0.001 to 3 mm/min (stepless
adjustable)
Working table stroke: 0 – 100 mm
Cell pressure: 0 – 1 Mpa
Drainage: 0 – 600 Kpa
Pore pressure: 0 – 1000 Kpa
Volume change: 0 – 50 cm3
Axial displacement: 0 – 20 mm (dial gauge)

 
TTA30-1 Bench-type Triaxial Testing Apparatus

 

Sample size: Φ39.1*80 mm, Φ61.8*125 mm (selectable)
Load capacity: 30 KN
Column rising range: 0 – 100 mm
Cell pressure: 0 – 2000 Kpa
Drainage: 0 – 1000 Kpa
Pore pressure: -20 – 2000 Kpa (digital display)
Volume change: 0 – 50 cm3
Axial displacement: 0 – 30 mm (dial gauge)

 
TTA30-2 Bench-type Triaxial Testing Apparatus

 

Sample size: Φ39.1*80 mm
Load capacity: 30 KN
Infinitesimal testing speed from 0.001 to 3 mm/min (stepless
adjustable)
Working table stroke: 0 – 80 mm
Cell pressure: 0 – 2000 Kpa
Drainage: 0 – 1000 Kpa
Pore pressure: 0 – 2000 Kpa
Volume change: 0 – 50 cm3
Axial displacement: 0 – 20 mm (dial gauge)

 
TTA-6A BS standard Triaxial Testing Apparatus

 

Specimens: Φ38×76 mm, Φ50×100 mm, Φ70×140 mm, Φ100×200mm
Load capacity: 60 KN
Infinitesimal testing speed from 0.0001 to 4.8 mm/min (stepless
adjustable)
Working table travel: 0-100 mm
Cell pressure: 0-2 Mpa (digital, LCD display)
Drainage: 0-1 Mpa (digital, LCD display)
Pore pressure: 0-2 Mpa
Volume change: 0-100 ml / 0.2 ml (resolution)
Power: 220 V, 50 Hz
Weight: 240 kg

 
TTA-6 BS standard Triaxial Testing Apparatus

 

Specimens: Φ38×76 mm, Φ50×100 mm, Φ70×140 mm, Φ100×200mm
Load capacity: 60 KN
Infinitesimal testing speed from 0.0024 to 4.5 mm/min (16-speed
mechanical transmission)
Working table travel: 0-100 mm
Cell pressure: 0-2 Mpa (digital, LCD display)
Drainage: 0-1 Mpa (digital, LCD display)
Pore pressure: 0-2 Mpa
Volume change: 0-100 ml / 0.2 ml (resolution)
Power: 220 V, 50 Hz
Weight: 240 kg

 
TTA-6C Triaxial Creep Testing Apparatus

 

Sample size: Φ61.8*125 mm
Cell pressure: 0 – 1.0 Mpa, accuracy≤1%F.S, resolution 0.005
Pore pressure: 0 – 1.0 Mpa, accuracy≤1%F.S, resolution 0.005
Axial loading: 0 – 2 Mpa, accuracy≤1%F.S
Axial displacement: 20 mm, resolution 0.01 mm
Loading method: weight

 
UCT-1 Strain-controlled Unconfined Compression Tester

 

Max. axial load: 0.6 KN
Sample size: Φ39.1*80 mm
Speed: 2.4 mm/min
Noted: UCT-1 is electric model, UCT-2 is manual.

 
SSMT Stabilised Soil Mould Tester

 

SSMT-1 Stabilised Soil Mould Tester
Specimen size: Φ50*100 mm

SSMT-2 Stabilised Soil Mould Tester
Specimen size: Φ100*200 mm
SSMT-3 Stabilised Soil Mould Tester
Consisting of the following parts:
Mould Φ50*50 mm
Mould Φ50*100 mm
End plug (two required)
Set of two displacing collars 12.5 mm high
Set of two displacing collars 6 mm high
Plunger
Specimen collector

 
PTA-1 Permeability Test Apparatus (falling head, variable head)

 

Sample specifications: 30 cm2area, 40 mm high
Compressive strength: 120 Kpa
Total weight: 3.5 kg
Overall dimensions:  ¢118×150mm

 
PTA-2 Permeability Test Apparatus (constant head)

 

Inner diameter of cylinder: 100±0.22 mm
Height of permeating cylinder: 400 mm
Space between ezometric pipes: 100±0.44 mm
Pressure hole: 3 pieces
Water supply bottle: 5000 ml
Overall dimensions: 400×226×146 mm
Weight approx: 20 kg

 
PTA-3 Coarse Soil Permeability Testing Apparatus

 

Sample size: Φ300*600 mm
Upstream head pressure: 0 – 1000 Kpa
Accuracy:  <1%F.S

 
PTA-C Compaction Permeameter
 
LLD-1 Casagrande Method Liquid Limit Device
 
LLD-CP Cone Penetrometer Method Liquid Limit Device

 

Dial indicator: 150 mm diameter graduated in 360*0.1 mm
divisions, indicator point incorporates friction/gear system
Height adjustment: rapid, using integral clamping mechanism
Cone release: manual
Cone: stainless steel, 35 mm long with smooth surface at angle of 30°
Penetration test cup: Φ55*40 mm

 
PLD-1 Plastic Limit Device
 
LPLD-1D Liquid & Plastic Limit Device

 

Measuring range: 22 mm Resolution: 0.1 mm
Measurement of non-linear errors:  <2%
Sensitivity:  >10 m
Cone weight: 100 g, 76 g
Measuring time: 5 s
Power supply: 220 V, 50 Hz
Overall dimensions: 300*230*420 mm
Weight approx: 8 kg

 
LPLD-2 Digital Liquid Plastic Limit Device

 

Cone weight: 76 g, 100 g
Measuring range: 0 – 25 mm
Accuracy: 0.01 mm
Delay time: 5 s
Power supply: 380 V, 50 Hz
Overall dimensions: 220*130*300 mm
Weight approx: 4 kg

 
LPLD-3 Digital Liquid Plastic Limit Device

 

Measuring range: 40 mm
Accuracy: 0.01 mm
Cone weight: 100 g, 76 g
Power supply: 220 V, 50 Hz, 1 ph. 300 W
Overall dimensions: 280*190*440 mm
Weight approx: 6 kg

 
LPLD-4 Digital Liquid Plastic Limit Device

 

Measuring range: 40 mm
Accuracy: 0.01 mm
Cone weight: 100 g, 76 g
Power supply: 220 V, 50 Hz, 1 ph. 300 W
Overall dimensions: 300*250*400 mm
Weight approx: 10 kg

 
SLT-V Volumetric Shrinkage Limit Tester

 

Porcelain evaporating dish
Shrinkage dish, made of metal, Φ42*12 mm
Glass cup, Φ70*50 mm
Prong plate, made of acrylic plastic fitted with three prongs, 76*76mm square, 2.4 mm thick
Flexible spatula 100 mm
Graduated cylinder 25 ml

 
SLT-L Linear Shrinkage Mould

 

25 mm dia.*12.5 mm height * 140 mm length

 
SLT-1 Shrinkage Limit Apparatus

 

Overall dimensions: 110*105*125 mm
Weight approx: 1 kg

 
Proctor Rammer and Mould

 

Supply ASTM, BS, NF, EN proctor mould and rammer

 
SC-3E Multi-function Electric Soil Compactor

 

Compaction speed: 30 tpm (times per minute)
Motor: 380V / 220V, 50Hz, 370W, 1400 rpm (round per minute)
Dimensions: 640 × 380 × 1320 mm
Net weight: 166 kg
Working environment: humidity ≤80%, temperature: -5 ~ 50℃

 
SRA-1 Sample Reduction Apparatus
 
SE-2 Sample Extruder

 

The extruder is actuated by a 50KN hydraulic jack, having ram travel of 250 mm.

 
SE-200 Multi-function Hydraulic Sample Extruder

 

Rated loading capacity: 200KN
Extrude speed: 100 mm/minute
Extrude height: 230 mm
Working voltage: 380V
Motor power: 1.1KW
Working oil: anti-wear hydraulic oil
Dimensions: 620 × 590 × 1050 mm
Net weight: 300 kg

 
SE-300 Multi-function Hydraulic Sample Extruder

 

Rated loading capacity: 300KN
Extrude speed: 150 mm/minute
Extrude height: 230 mm
Working voltage: 380V
Motor power: 1.1KW
Working oil: anti-wear hydraulic oil
Dimensions: 620 × 590 × 1050 mm
Net weight: 300 kg

 
CBR-1 Electric CBR Tester

 

Capacity: 30 KN, 50 KN
Standard penetration speed: 1mm/min
Testing range: 30 KN, 50 KN
Size of the penetration rod:  ¢50×100mm
Size of the cylinder:  ¢152×170mm
Surcharge  weight  (split):  total  8  sets  (outside  diameter:  150mm,
inside diameter: 52mm), 1250g per set, divided into two semicircle
along the diameter.
Power supply: 220 V, 50 Hz

 
CBR Mould and Accessories

 

Supply BS, EN, ASTM, NF CBR mould and accessories.

 
STA1 Swell Test Apparatus
 
FDK series Field Density Kit

 

FDK-100 field density kit 100 mm
FDK-150 field density kit 150 mm
FDK-200 field density kit 200 mm

 
SDCA-1 Sand Density Cone Apparatus
 
RDTA-2 Hand-operated Relative Density Test Apparatus

 

Metal container: 250 ml, inner diameter 50 mm, 127.5 mm high
1000 ml, inner diameter 100 mm, 127.5 mm high
Compaction rammer: 1.25±5 kg, 457.2 mm fall height, diameter 49
mm and 99 mm

 
RDTA-1E Electric Relative Density Test Apparatus

 

Metal container: 250 ml, inner diameter 50 mm, 127 mm high, with collar
Compaction rammer: 1.25 kg, 150 mm fall height, diameter 50 mm, 32 TPM (times per minute)
Vibration rammer: 155 TPM (times per minute)
Timing range: 0~15 minutes
Power: 120 W
Power supply: 220 V, 50 Hz
Weight approx: 40 kg

 
DCP-1 Dynamic Cone Penetrometer

 

Drop height: 575 mm  Cone: 20 mm diameter
Measuring depth: 850 mm
Supplied complete with all necessary tools and assembly operating
instruction

 
SP-2 Soil Pocket Penetrometer

 

Hammer: 2.5 kg
Falling height (drop): 30 cm
Penetration needle: 10 cm long, area 1 cm2
Weight approx: 3.6 kg

 
SP-1M Micro Penetrometer

 

Penetration depth: 30cm

 
SP-R Proving Ring Penetrometer

 

Proving ring: 1 KN capacity
Cone: 30°

 
SHT-3 Soil Hardness Tester

 

Measuring depth: 0 – 200 mm
Penetration head: 1 cm2
Spring loading: 0.25 KN, 0.75 KN, 0.50 KN (according to different requirements)
Record paper: for 60 records
Overall dimensions: 624*185*157 mm
Weight approx: 5 kg

 
SS1 Soil Samplers
 
SS2 Oakfield Soil Sampling Kit
 
PHA-1 Post Hole Augers (Iwan Type)
 
HA Hand Auger
 
RA Regular Augers
 
SA Sand Augers
 
MA Mud Augers
 
DA Dutch Augers
 
Static Penetrometer

 

Driven mode

Handle-chains type

Rated penetration capacity

3 ton

Penetration depth

20 meters

Penetration speed

0.9 ~ 1.2 MPM (meter per minute)

Lifting speed

Fast speed can up to 4 MPM (meter per minute)

Penetration rod 

Φ28* 1000mm

Penetration head

10cm2, single bridge head.

Net weight

About 55KGS

 
  PRODUCT LIST
 
Soil
Concrete
Cement
Sand & Aggregate
Rock
Asphalt & Bitumen Mixture
Testing Machines
General Equipment
 
 
 
点击添加我作为你的新联系人,若点击后没有提示框弹出,请手动添加账号或下载最新版 Windows Live Messenger 8.0
 
 
 
  HOME  |  PRODUCT  |  NEWS  |  ABOUT US  |  CONTACT US  |  Powered by DACHENG Geotest equipments